Computer Parts
Build A Computer
Gaming Computers
Windows 7
I Want Speed


A SATA raid is using multiple hard drives to achieve more speed, or reliability or both. There are different types of raids, the most common ones are explained below. For a full definition, click here.

Raid 0, or striping, splits all your data on to the number of hard drives you have. If you save a file that is 1GB, half a GB would go to either drive.

Raid 1, or mirroring, makes an exact copy of every file on your hard drive. This way if one hard drive crashes, the other one can take over and you don't lose any work.

Raid 5 is a raid setup that needs at least three hard drives. It will save data across all the drives you have, except you will lose the capacity of one hard drive. In the event of a drive failure, you can replace the drive, rebuild the raid and no data will be lost. This setup is commonly found in a lot of business servers.

My personal preference is Raid 0. I always keep an up to date backup so even if a drive fails, I don't lose any work. After setting my first one up, I have become addicted to the speed.


Check to see which SATA ports your hard drives are connected to on the motherboard. Next, boot into your BIOS, and enable raid support for those drives. You can see an example here. As you can see this setup has the raid drives on 1, 2, and 5. After you are done in the BIOS, save changes and reboot the computer.

While the computer is booting, wait for a screen that looks something like this. Push the required key to get into setup.

Get the manual that came with your motherboard, your options may be slightly different, the concept will be the same. For this motherboard, set the raid mode to striping, leave striping block at it's default, then select the drives you want to use. When you select the finish key, you'll probably get a confirmation screen. Because we have changed the drive setup, we are aware all disk data will be cleared so we say yes.

We are now returned to a list that shows our current raid setup. As you can see we need to change this drive so it is bootable by our operating system, here we just push B to make the change. Exit now and your computer will restart. You are now ready to install Windows, or your operating system of choice.

Click here to go to Windows 7.
Click here to go from SATA Raid to Build A Gaming Computer.
Click here to go back to the Home Page.

footer for sata raid page